Lifting belt is indispensable in many large lifting operations at present, the lifting belt is made of high strength synthetic fiber material, has a strong load capacity, and because of the reason of non-metallic material, can play a good role in the protection of the lifting target. It is important to use the lifting belt in the rated load, but it is not enough to ensure that there is no overload. The following points need to be noted.
First, the typical flat lifting belt belongs to hoisting belt, flat lifting belt more usually used to surround bundled hoisting, and in the use of flat belt of hoisting need special attention is that the lifting belt do not twist, either attached to the equipment of the belt body part, or suspended in the air with body parts must keep stretch as far as possible, Otherwise, the twisting state will aggravate the loss of the filament under the action of high load, easy to cause deformation and irrecoverable.
Second, lifting belt with hook points to mention notice, it is important to ensure that hook there is enough room for space, and have security card buckle for block, prevent lifting belt slippage hook caused by falling accident, if the hooks hold space is not enough, must not bring into force the assembly, to choose appropriate shackle, rings and other fittings, rigging do for lifting belt connection, To ensure the safety of lifting operation.
Third, lifting belt, due to the particularity of the material must be hard to avoid the sharp edges and corners, because under high load, the edges and is easy to cut hoisting belt, and then bring serious fall accident, in addition when hoisting belt used to surround bundling, equipped with safety protection cover for the lifting, as far as possible to reduce the belt body of wear and tear, Thus effectively extend the service life of the lifting belt.
It can be seen that in addition to the overload problem in the use of lifting belt, there are a lot of things we need to pay attention to. Only by doing a good job in all aspects of detail processing can we ensure the safety of lifting belt lifting operation.