1. When in use, the Slings belt should be directly hung into the force center of the hook and directly hung on the hook tip.
2, the Slings belt is not allowed to cross, twist, do not allow knot, screw, should use the correct lifting special link to link.
3. The use process must be directed by personnel with relevant qualifications, and it is strictly prohibited to overload the use.
4. When working with two Slings belts, hang the two Slings belts directly into the double groove, and each sling is hung at the symmetrical stress center of the two hooks; When four slings are used, each two slings should be directly hung into the double hook. The inner slings should not overlap or squeeze each other, and the slings should be symmetrical to the force center of the hook.
5. When loading the goods with sharp corners and edges, it is necessary to use the methods of sheath and Angle protection to protect the sling, so as to extend the service life of the sling and eliminate potential safety risks.
6. When a single Slings belt is needed to lift the cylinder, double coils should be used to bind it.