According to different lifting environment requirements, Slings belt can be divided into ordinary type, fireproof type, fluorescent type, light detection type, high strength type, combined type, etc. The selection and use requirements are as follows:
(1) When selecting and determining the Slings belt, the ultimate working load required should be selected according to the mode coefficient and the nature of the lifting item; The size, shape, quality of the item, the way it is used, the working environment and the nature of the item all affect the correct choice of the lifting belt.
(2) Before lifting items, plans should be made for hanging, lifting and descending operations.
③ The Slings belt should be placed correctly and connected to the articles in a safe way. And ensure that the place connecting the lifting belt and the article is flat, so that the Slings belt is evenly loaded in the width direction, and the Slings belt should not be overlapped or bent.
(4) The Slings belt should be prevented from being cut, friction and wear by the sharp edge of the goods or the lifting device. Protectant reinforced parts for protection against sharp edges and wear damage shall be part of the lifting belt and shall be properly positioned. Provide additional protection for the part if necessary.
(5) When lifting, you should ensure that the item is under control, that is, to prevent the item from rotating or colliding with other items. Instantaneous or impact loading should be avoided to avoid increasing the force on the lifting belt.
⑥ Before the Slings belt is stored, it should be checked whether there is any damage during its use. Slings belt should not be returned to storage if damaged.