The lifting belt is more portable than steel wire rope and lifting chain, and can also effectively protect the surface of the lifting target from any damage. The lifting belt is usually used to connect the hook, but the connection between the lifting belt and the hook is particular. How can the two cooperate to complete the lifting operation more efficiently and safely?
The connection mode between the lifting belt and the hook is as follows: when we use two lifting belts for lifting operations, we need to hook them into the double hooks, and the two lifting belts are respectively hung at the center of the double hooks under symmetrical force; When four lifting belts are used at the same time, when each two lifting belts are directly hung into the double hook, it should be noted that the two lifting belts cannot overlap and squeeze each other, and the four lifting belts should be symmetrical to the force center of the hook.
There is a very important link to be noted in the process of matching use, that is, it is necessary to hang the lifting belt directly to the center of the force on the hook, not to the tip of the hook. When using the lifting belt, it is likely that the width of the lifting belt will be larger due to the smaller inner diameter of the hook, making it impossible to spread during the connection process, thus causing the lifting belt to twist. For this case, The matching hook shall be selected for operation.
These are some details that should be paid attention to when the lifting belt and hook are used together, and these details can ensure the efficiency and safety of the lifting operation.