In the hoisting operation, the slingand hook are common. How can they be used together to maximize the effect? Let's take a look at the operation precautions we have sorted out.
When using the lifting belt, hang the lifting belt directly to the force center of the hook, not to the hook tip. When using two lifting belts for operation, hang the two lifting belts directly on the double hooks. The lifting belts shall be hung at the symmetrical stress center of the double hooks; When using four lifting belts, each two lifting belts shall be directly hung on the double hooks. Note that the lifting belts in the hooks shall not overlap and squeeze each other, and the lifting belts shall be symmetrical to the force center of the hooks.
When using the sling, because the bending part of the hook makes the flat sling unable to carry evenly in the width direction, it is affected by the inner diameter of the hook. If the hook diameter is too small and it is not fully connected with the webbing eye, the correct connector shall be used for connection.
The lifting belt has a single form, but there are many accessories that can be matched with it in various forms, so there are still some differences in the aspects that need attention for different combinations. You may wish to further understand to our staff to provide more guarantees for their safe operation.