When the object is placed after the lifting belt is lifted, there will be deviation from the place where it is placed. Many people will directly pull the object to the
designated position. This is simple and fast, but this is wrong and dangerous. Why then?
Because directly pulling the lifted object will also move the position of the lifting belt, the lifting angle will change, and the weight of the lifted object will also change. When the use capacity of the lifting belt is exceeded, the lifting accident will occur. Even if the distance between the hoisted object and the ground is not very large, such accidents cannot be underestimated. In addition, directly pulling the lifted object will rub the lifting belt and cause certain damage to the lifting belt. The correct way is to move the lifting belt to the designated position and place the lifted object.
Although it is much easier to pull the hoisted object directly than to adjust the hoisting position by mechanical operation, it also has great risks. In order to ensure the safety of lifting operation, we must use the lifting belt according to the specifications, and do not cause unnecessary economic losses due to small losses.