The production of lifting belt should go through a series of tedious steps, and each step is particularly critical. The absence of any step can not create a perfect lifting belt. Here we will learn about the tedious production process of lifting belt.
The production process of lifting belt is first of all "textile", lifting belt needs to be woven into industrial filament fiber semi-finished ribbon by professional lifting belt weaving machine. Then "printing and dyeing" is carried out, the woven flat ribbon is placed in the dyeing tank, the dyeing machine is heated up, the dyeing machine is started after the temperature reaches the standard, when the temperature and the machine speed reach a balance value, the dyed ribbon can achieve the best effect. Then it is the "cutting" of the lifting belt. The size of the lifting belt cutting of different specifications and models is not the same. According to the length of the finished lifting belt, the length of the semi-finished weaving belt is determined and the length is measured and cut. The last is the "sewing" of the lifting belt, which is also the last step of the finished product of the lifting belt, which is also an important step. Before sewing, it is necessary to understand the overall structure of the lifting belt, such as the special type of lifting belt according to the special sewing method for sewing manufacturing.
After these tedious steps, a lifting belt came into being, but the finished lifting belt is not directly packaged and sent to the market, but also through a testing link, which is to ensure the safety of the lifting belt.