Flat lifting belt production with advanced machinery and equipment, including dyeing machine, sewing machine, electric pole and so on, every link should pass strict checks, strive for perfection, but gold can gather, the width of the lifting belt will be some deviation, this kind of phenomenon is widespread, so flat lifting belt width deviation. What should I do?
The width deviation of flat lifting belt should be analyzed according to the actual situation. Generally speaking, as long as the deviation is normal within the allowable range, how much is the allowable range?
Judge whether the deviation is normal according to the cross section of the lifting belt. If the cross section width of the lifting belt is less than or equal to 100mm, the allowable deviation is 10%. If the cross section of the lifting belt is greater than 100mm, the allowable deviation is 8%. For example, if the cross section width of the lifting belt is 100mm, the allowable deviation is 10mm. If the cross section width of the lifting belt is 150mm, the allowable deviation is 12mm, etc.
Therefore, the width deviation of flat lifting belt will not cause any impact as long as it is within the allowed range, so it can be used at ease.