Lifting belt is mainly used to bind and fix objects. When objects are lifted, the lifting belt hook is hung on the hook, and the equipment starts lifting objects. The lifting belt can be used single or multiple. Its soft fabric and large load bearing force will not cause scratches on the surface of heavy objects, and it can easily and quickly complete the lifting and handling of objects.
During the operation of two hoisting belts, the two hoisting belts shall be directly hung into the double hooks, and the two hoisting belts shall be hung in the symmetrical stress center of the double hooks. When four hoisting belts are used, when two hoisting belts are directly attached to the double hooks, it should be noted that the two hoisting belts in the hook cannot overlap or squeeze each other, and the four hoisting belts should be symmetrical in the stress center of the hook.
It should be noted that when using the lifting belt, the lifting belt should be directly hung into the stress center of the hook, not the tip of the hook. In addition, when using the lifting belt, the bending part of the hook makes the flat lifting belt not evenly stressed in the width direction, which is affected by the inner diameter of the hook. If the hook diameter is too small, the connection with the sling eye is not sufficient, and the correct connector should be used to connect.