Any lifting tools have a safety standard for use, lifting belt is no exception, lifting belt belongs to the most representative sling in lifting operations, has a very wide use rate, so what is the use of safety standards for lifting belt? The following chenghua manufacturing for everyone to take stock one by one.
The safe use of lifting should be established within the range of rated load. If multiple lifting belts are used at the same time, it is necessary to ensure that each lifting belt shares the same force, and the force imbalance cannot occur.
The lifting belt also has requirements for the lifting belt target, that is, the lifting target must be smooth and smooth, without burrs and sharp edges and corners. Otherwise, it will cause huge cuts to the lifting belt, resulting in a fall accident.
When lifting and placing the lifting belt, the whole strip should be picked up. It is not allowed to drag the lifting belt, which is easy to damage the synthetic fiber on the surface of the lifting belt.
The lifting belt should not be in the state of hanging heavy objects for a long time, and the heavy objects should be unloaded at the first time. The lifting belt should be in the state of high load for a long time, which will seriously affect its safety factor.
If the lifting belt is used in high temperature or abnormal environment such as lifting chemical substances, it should be used in accordance with the manufacturer's instructions and suggestions, and it should not be blindly carried out lifting operations.
The lifting belt should be stored under the condition of avoiding light and ultraviolet radiation. It should not be stored near open fires or other heat sources. It should be better protected during the lifting operation.
The above points are summarized by Chenghua Manufacturing lifting belt use safety standards, I hope everyone can comply with, this is not only to ensure the integrity of lifting, more importantly, to protect the safety of each and every one of our lives and property.