When we go out, our shoes will inevitably be covered with a layer of dust, especially in windy and sandy weather. At this time, we usually use a shoe brush to clean the dust on our shoes.If the lifting belt is hoisted in a harsh environment for a long time, it will also face this problem. Can the shoe brush be used to clean the lifting belt when it is covered with dust? Strictly speaking, it is not allowed. The reason is that Chenghua manufacturing brings us a simple explanation.
It is common to use a brush to remove dust in our daily life, but the effect of using it on the sling is not so good. There is no doubt that the overall strength of the sling is very high, but this is due to the strength of each small fiber.
When the brush is used to clean the lifting belt, it needs to repeatedly rub each position, so it is easy to damage the fiber of the lifting belt, such as breakage and jumper. Once this happens, the safety factor of the lifting belt will be greatly reduced.
It is recommended to soak the lifting belt in clean water as much as possible. The dust and stains on the sling after soaking will drift away under the action of water, and then gently wash it, so as to ensure the cleanness and strength of the sling.